Performance Parts Central

Cusco Oval Shaft Strut Bar (CZ4A)

kenic — Mon, 15 Dec 2008 03:58:43 +0000

Cusco Strut Bar with Oval Shaft, for Mitsubishi Lancer Evolution X (CZ4A).

Cusco Part No.

566 540 A

Price:

15750yen

car model

Mitsubishi Lancer Evolution X (CZ4A)

Pan Speed Blitz K5-700R Turbine PKE331

kenic — Wed, 18 Jun 2008 11:18:14 +0000

Pan Speeds Turbine for Mazda RX-7 (FC3S/FD3S). This was developed with Blitz, suits to rotary engine and develop big torque from low RPM.

car model

Mazda RX-7 (FC3S)
Mazda RX-7 (FD3S)

Pan Speed Twin Oil Cooler PKE303 for FD3S/FC3S

kenic — Tue, 17 Jun 2008 12:45:56 +0000

Pan Speed’s Twin Oil cooler PKE303 for Mazda RX-7 (FD3S/FC3S). This oil cooler has two core that 19 fins each. This kit comes with stainless mesh hoses and a fitting kit.

car model

Mazda RX-7 (FC3S)
Mazda RX-7 (FD3S)

Pan Speed Mirror for Mazda RX-7 (FD3S)

kenic — Sat, 14 Jun 2008 12:30:02 +0000

This Pan Speed’s Aerodynamic mirror for RX-7 is made from FRP.

car model

Mazda RX-7 (FD3S)

Pan Speed “GT2001″ Side Step PDA103

kenic — Fri, 13 Jun 2008 23:43:57 +0000

Pan Speed’s “GT2001″ side step for Mazda RX-7 (FD3S). It’s FRP made.

spec.

FRP made.

car model

Mazda RX-7 (FD3S)

Pan Speed “GT2000″ Side Step PDA005

kenic — Fri, 13 Jun 2008 23:12:13 +0000

Pan Speed’s “GT2000″ side step for Mazda RX-7 (FD3S). It’s aluminum made.

spec.

aluminum made

car model

Mazda RX-7 (FD3S)

Pan Speed “GT2000″ Hatch

kenic — Thu, 12 Jun 2008 23:24:47 +0000

Pan Speed “GT2000″ Hatch for Mazda RX-7 (FD3S). This FRP made hatch is light weight, and can be attached with Acrylic resin window (sell separately).

car model

Mazda RX-7 (FD3S)

Pan Speed “GT2000″ Hood

kenic — Thu, 12 Jun 2008 12:26:50 +0000

Pan Speed’s “GT2000″ Hood for Mazda RX-7 (FD3S). The air outlet is big and escape heat from the engine room.

car model

Mazda RX-7 (FD3S)

Pan Speed Aluminum Suction Pipe PDE306

kenic — Wed, 11 Jun 2008 22:09:37 +0000

Pan Speed’s Aluminum made suction pipe for Mazda RX-7 (FD3S). The genuine suction pipe is made from plastic, therefore it will be damaged by high heat occurred by the high boost pressure. This Beautifully buffed aluminum made suction pipe can resist against high heat and high pressure.

car model

Mazda RX-7 (FD3S)

Pan Speed GT Bumper Spoiler PDA503

kenic — Tue, 10 Jun 2008 23:12:35 +0000

Pan Spped’s GT Bumper Spoiler for Mazda RX-7 (FD3S). This Front Bumper Spoiler adds down force at the front end.

car model

Mazda RX-7 (FD3S)

Pan Speed “GT2004″ Front Bumper Spoiler PDA301

kenic — Tue, 10 Jun 2008 22:55:44 +0000

Pan Speed’s “GT2004″ Front Bumper Spoiler for Mazda RX-7 (FD3S). It has a variable spoiler integrated at the center. It can be attached after FD3S V type or later. If you want to attach it before V type, you need V type turn signal lens.

car model

Mazda RX-7 (FD3S) Type V or Later.

Pan Speed “GT2000″ Front Bumper Spoiler PDA003

kenic — Mon, 09 Jun 2008 23:26:03 +0000

Pan Speed’s “GT2000″ Front Bumper Spoiler for Mazda RX-7 (FD3S). It has a variable spoiler integrated at the center. It can be attached after FD3S V type. If you want to attach it before V type, you need V type turn signal lens.

car model

Mazda RX-7 (FD3S) V type or later.

Pan Speed “GT2000″ Front Wide Fender PDA002

kenic — Mon, 09 Jun 2008 14:04:42 +0000

Pan Speed “GT2000″ Front Wide Fender for Mazda RX-7 (FD3S). It can replace the original fender without modification. The difference between GT2000(PDA002) and GT2001(PDA102) is the height of the wheel arch.

car model.

Mazda RX-7 (FD3S)

Pan Speed Front Over Fender PDA506

kenic — Mon, 09 Jun 2008 13:58:16 +0000

Pan Speed Front Over Fender for Mazda RX-7 (FD3S).

car model

Mazda RX-7 (FD3S)

Pan Speed Front Wide Fender PDA102

kenic — Sun, 08 Jun 2008 07:48:53 +0000

Pan Speed’s Front Wide Fender for Mazda RX-7 (FD3S). It can be attached witout modification.

car model

Mazda RX-7 (FD3S)

Pan Speed Rear Over Fender PDA303

kenic — Sat, 07 Jun 2008 00:31:04 +0000

Pan Speed’s rear over fender for Mazda RX-7 (FD3S). This covers the tire when you use over sized one.

spec.

model name: PDA303
Rear Over Fender

car model

Mazda RX-7 (FD3S)

Pan Speed 3 Layer Core SPL intercooler

kenic — Fri, 06 Jun 2008 23:09:18 +0000

Pan Speed 3 Layered Core Special Intercooler, this can be applied to 600HP of max. power. It comes with an aluminum piping set. To fit this kit, the radiator must be changed because of the spacious matter.

spec.

all aluminum made three layered core
with an aluminum made piping set
the capacity covers until 600 HP

car model

Mazda RX-7 (FD3S)

Pan Speed Rear Double Wing

kenic — Thu, 05 Jun 2008 08:36:30 +0000

Pan Speed’s Carbon made Rear Double Wing for Mazda RX-7 (FD3S). This wing gives high down force to your car.

spec.

wet carbon made rear double wing.

car model

Mazda RX-7 (FD3S)

Koyo Rad Intercooler for Nissan Silvia

kenic — Wed, 04 Jun 2008 11:30:38 +0000

all aluminum made Intercooler for Nissan Silvia S14/S15. the size is bigger than the genuine intercooler is. so it can make air cooler, and the lower inhalation resistance gives more power.

spec.

maker: Koyo Rad
all aluminum made intercooler.
can replace the genuine part without any modification.

car model

Nissan Silvia S14/S15 (SR20DET)

5ZIGEN ProRacer Titanium Race Muffler

kenic — Tue, 03 Jun 2008 23:17:15 +0000

5Zigen Titanium made Racing Muffler. It weighs only 1/3 of the genuine muffler. FD2 genuine muffler weighs 15.0kg, and ProRacer Titanium weighs only 1.8kg!

spec.

material: titanium
main pipe: 70mm Diameter, 1.0mm thickness
silencer: 127 Diameter, 300mm length

car models

CIVIC FD2
CIVIC EK9
INTEGRA DC5
INTEGRA DC2
ACCORD CL7
S2000 AP1
NA1 NSX

5ZIGEN ProRacer Headers

kenic — Tue, 03 Jun 2008 22:37:06 +0000

5Zigen Pro Racer Stainless Steel Made Exhaust Manifold.

spec.

main pipe: Stainless Steel SUS304
4-2-1 type layout

car models

CIVIC FD2
CIVIC EK9
INTEGRA DC5
INTEGRA DC2
ACCORD CL9
S2000 AP1
FIT GD1/3

5ZIGEN ProRacer Race Exhaust Manifold

kenic — Mon, 02 Jun 2008 22:21:35 +0000

This beautiful stainless made exhaust manifold is made by stainless pipes. It’s for racing use.

spec.

4-2-1 type
pipes: SUS304 (1.5mm thickness)

car models

CIVIC FD2
INTEGRA DC5
ACCORD CL7

5ZIGEN ProRacer ZZ Muffler

kenic — Mon, 02 Jun 2008 15:43:37 +0000

5 zigen proracer zz, stainless steel made light weight exhaust system.

spec.

main pipe: SUS436 (1.2mm thickness)
tail end: SUS304 (two types depend on car model)

car model

CIVIC FD2
CIVIC EP3
CIVIC EK9
INTEGRA DC5
INTEGRA DC2
ACCORD CL7/9 double end/single end
S2000 AP1/2 double end/single end
FIT GE6

Tokyo Auto Salon 2008

kenic — Wed, 16 Jan 2008 07:39:58 +0000

The Tokyo Auto Salon 2008 opened up last week, from Friday to Sunday. I visited there on Friday and Saturday.

fig. 1. the tokyo auto salon 2008

There were so many Hammers around on the show 2007, but this year of course, the new nissan GTR was the main feature of the show. I saw GTRs in almost every shop’s booth. There were over 30 GTRs totally. not bad. This one was at HKS booth.

fig. 2. HKS GTR

There were many new Subaru Imprezza STi and Mitsubishi Lancer Evolution X were also around. Excluding the three new hot models, there were R32 Skylines and S13 or S14 Silvias. I also saw a corolla too.

fig. 3. old corolla coupe

Well, to say the truth, the main purpose for most of people are NOT cars. but, this?

fig. 4. a show girl

In front of a girl who wore clothes that covers her body to satisfy the minimum requirement, there were TOO MANY guys with various cameras, from EOS 1D to mobile phone camera…There were over 250,000 people came to the show in 3 days total, anyway. This must be the biggest show of the aftermarket performance parts in the world. Would you visit next year also?

hello kitty exhaust pipe

kenic — Tue, 18 Dec 2007 09:39:58 +0000

This must be nice.